M.Ing. / This study covers the problem of a periodic distortion and it's electronic compensation. The description and definition of power transfer in a single-phase electrical network is investigated. The various techniques for achieving optimal power transfer are then derived. From this the principle of the compensation of reactive power in an electrical power network is derived using the definition of power transfer. In order to evaluate and illustrate this principle a system configuration, consisting of a controlled source of reactive power is used. Due to the complexity of the system it was initially decided that a computer simulation would serve as an analytical aid. This provides the opportunity to conduct a thorough investigation into the functioning of the proposed compensator. Using the knowledge thus gained. an experimental system was developed. The simulated system is compared to practically obtained results in an experimentally developed compensator in order to evaluate the accuracy and reliability of the simulation. The study then concentrates on the characterization of the two systems as applied in the compensation of reactive power. This analysis also contributes to the identification of deficiencies in the system. The study then concludes with a critical evaluation of the work and suggestions for improvement. This includes the optimization of the total system and the application in industrial power networks.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:13341 |
Date | 16 February 2015 |
Creators | Boshoff, Septimus |
Source Sets | South African National ETD Portal |
Detected Language | English |
Type | Thesis |
Rights | University of Johannesburg |
Page generated in 0.0019 seconds