Many drinking water treatment facilities face problems with algal organic matter (AOM) due to eutrophication of the environment and frequent occurrence of algal blooms. AOM can cause deterioration of water organoleptic properties, but the main threat is the potential for acting as a precursor of toxic disinfection by-products (DBPs). The presented master thesis deals with the possibility of using electrocoagulation (EC) - an innovative electrochemical method - to remove cellular organic matter (COM) produced by cyanobacteria Microcystis aeruginosa from drinking water. EC is similar to widely used chemical coagulation, the difference is that during EC the coagulant is produced by electrochemical dissolution of an iron or an aluminum electrode. Synthetic water with COM concentration of 5.5 and 8.5 mg/L of TOC was used for the experiments. The target value of conductivity (4.5 mS/cm) was reached by addition of NaCl. pH of the solution was adjusted by HCl and NaOH. During some of the experiments, NaHCO3 was added to increase the ANC4.5. The experiments were conducted in a batch mode with a stainless-steel cathode and an aluminum or an iron anode. The coagulant dosage was regulated by applied electric current passing through the electrodes. Flocs were separated by sedimentation and centrifugation. COM...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:452755 |
| Date | January 2021 |
| Creators | Krušinová, Zuzana |
| Contributors | Klusoň, Petr, Mašín, Pavel |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0063 seconds