Interferometric optical fiber sensors have proved many orders of magnitude more sensitive than their electrical counterparts, but they suffer from limitations in signal demodulation caused by phase ambiguity and complex fringe counting when the output phase difference exceeds one fringe period. Various signal demodulation methods have been developed to overcome some of the these drawbacks with limited success. This thesis proposes a new measurement system for the extrinsic Fabry-Perot interferometer (EFPI) sensor. Using a wavelength modulated source and a novel extended-gap EFPI, some of the limitations of interferometric signal demodulation are overcome. By scanning the output wavelength of a multilongitudinal mode laser diode through current modulation, the EFPI sensor signal is scanned through multiple fringes. Gap movement is then unambiguously determined by monitoring the phase of the multiple fringe pattern. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/36516 |
| Date | 04 December 1996 |
| Creators | Meller, Scott A. |
| Contributors | Electrical and Computer Engineering, Wang, Anbo, Murphy, Kent A., Claus, Richard O. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | etd.pdf, thesisfinal.pdf |
Page generated in 0.0019 seconds