Return to search

Three dimensional stress intensity factor for large arrays of radial internal surface cracks in a cylindrical pressure vessel

The objective of this study is to present the mode I stress intensity factor distribution (SIF) along the crack-front for a wide array of semicircular and semi-elliptical surface cracks inside of a pressurized thick-walled cylinder. A three-dimensional finite element package ANSYS is used to evaluate the SIF for multicracked cylinder with number of cracks from n=1 to 128, the ratio of crack-depth to the wall thickness a/t=0.05 to 0.6, the ellipticity of the crack (the crack-depth to the semi-crack length) a/c=0.2 to 1.5, the ratio of the outer to the inner radius ro/ ri=2.
A substructuring technique is introduced which solved a coarse model meshed with ten-node isoparametric elements and applied the resulting displacements in the boundary surface of a submodel which is built employing singular elements along the crack-front to produce the 1/√r singularity . The SIF is evaluated using nodal-displacement method.
To validate the modeling and analysis procedure of the present results various configurations were solved using this method and compared to other finite element solutions. The present results were in very good agreement: less than 5 % comparing with Raju and Newman's results and within 8 % of Kirkhope's results.
An empirical equation to calculate the maximum SIF, was developed in this study. The equation was obtained by nonlinear fitting of the finite element results and the error was within ± 5.7 %.

Identiferoai:union.ndltd.org:fiu.edu/oai:digitalcommons.fiu.edu:etd-3757
Date22 November 1993
CreatorsPierola, Javier
PublisherFIU Digital Commons
Source SetsFlorida International University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceFIU Electronic Theses and Dissertations

Page generated in 0.0019 seconds