Adequate control of the position of the plasma column within the STOR-M tokamak is a chief requirement in order for experimental quality discharges to be obtained. Optimal control over tokamak discharge parameters, including the plasma position, is very difficult to achieve. This is due in large part to the difficulty in modelling the tokamak discharge parameters, as they are highly nonlinear and time varying in nature. The difficulty of modelling the tokamak discharge parameters suggests that a control system, such as a fuzzy logic based controller, which does not require a system model may be well suited to the control of fusion plasma.
In order to improve the quality of control over the plasma position within the STOR-M tokamak, the existing analog PID controller was modified. These modifications facilitate the application of a digital controller by a personal computer via the Advantech PCL-711B data acquisition card. The performance of the modified plasma position controller and an Arbitrary Signal Generator developed by the author was evaluated. This modified plasma position controller was applied successfully to the STOR-M tokamak during both normal mode and A.C. mode operation. In both cases, the modified controller provided adequate control over the position of the plasma column within the discharge chamber. Furthermore, the modified controller was more convenient to optimize than the original, existing analog PID controller.
By taking advantage of the modifications that were made to the plasma position controller, a fuzzy logic controller was developed by the author. The fuzzy logic based plasma position controller was also successfully applied to the STOR-M tokamak during both normal mode and A.C. operation. The fuzzy controller was demonstrated to reliably provide a higher degree of control over the position of the plasma column within the STOR-M tokamak than the modified PID controller.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-01302003-162004 |
| Date | 04 February 2003 |
| Creators | Morelli, Jordan Edwin |
| Contributors | Wood, Hugh C., Salt, J. Eric, Kasap, Safa O., Hirose, Akira, Gander, Robert, Bugg, James D., Boucher, Claude |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-01302003-162004/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0016 seconds