Finite Element (FE) analysis is a powerful numerical technique widely utilized to simulate the real-world response of complex engineering structures. With the advancements in adaptive optimization frameworks, multi-fidelity (coupled shell-solid) FE models are increasingly sought during the early design stages where a large design space is being explored. This is because multi-fidelity models have the potential to provide accurate solutions at a much lower computational cost. However, the time and effort required to create accurate and optimal multi-fidelity models with acceptable meshes for highly complex structures is still significant and is a major bottleneck in the FE modeling process. Additionally, there is a significant level of subjectivity involved in the decision-making about the multi-fidelity element topology due to a high dependence on the analyst's experience and expertise, which often leads to disagreements between analysts regarding the optimal modeling approach and heavy losses due to schedule delays. Moreover, this analyst-to-analyst variability can also result in significantly different final engineering designs. Thus, there is a greater need to accelerate the FE modeling process by automating the development of robust and adaptable multi-fidelity models as well as eliminating the subjectivity and art involved in the development of multi-fidelity models. This dissertation presents techniques and frameworks for accelerating the finite element modeling process of multi-fidelity models. A framework for the automated development of multi-fidelity models with adaptable 2-D/3-D topology using the parameterized full-fidelity and structural fidelity models is presented. Additionally, issues related to the automated meshing of highly complex assemblies is discussed and a strategic volume decomposition technique blueprint is proposed for achieving robust hexahedral meshes in complicated assembly models. A comparison of the full-solid, full-shell, and different multi-fidelity models of a highly complex stiffened thin-walled pressure vessel under external and internal tank pressure is presented. Results reveal that automation of multi-fidelity model generation in an integrated fashion including the geometry creation, meshing and post-processing can result in considerable reduction in cost and efforts. Secondly, the issue of analyst-to-analyst variability is addressed using a Decision Tree (DT) based Fuzzy Inference System (FIS) for recommending optimal 2D-3D element topology for a multi-fidelity model. Specifically, the FIS takes the structural geometry and desired accuracy as inputs (for a range of load cases) and infers the optimal 2D-3D topology distribution.
Once developed, the FIS can provide real-time optimal choices along with interpretability that provides confidence to the analyst regarding the modeling choices. The proposed techniques and frameworks can be generalized to more complex problems including non-linear finite element models and as well as adaptable mesh generation schemes. / Doctor of Philosophy / Structural analysis is the process of determining the response (mainly, deformation and stresses) of a structure under specified loads and external conditions. This is often performed using computational modeling of the structure to approximate its response in real-life conditions.
The Finite Element Method (FEM) is a powerful and widely used numerical technique utilized in engineering applications to evaluate the physical performance of structures in several engineering disciplines, including aerospace and ocean engineering. As optimum designs are increasing sought in industries, the need to develop computationally efficient models becomes necessary to explore a large design space. As such, optimal multi-fidelity models are preferred that utilize higher fidelity computational domain in the critical areas and a lower fidelity domain in less critical areas to provide an optimal trade-off between accuracy and efficiency. However, the development of such optimal models involves a high level of expertise in making a-priori and a-posteriori optimal modeling decisions. Such experience based variability between analysts is often a major cause of schedule delays and considerable differences in final engineering designs. A combination of automated model development and optimization along with an expert system that relieves the analyst of the need for experience and expertise in making software and theoretical assumptions for the model can result in a powerful and cost-effective computational modeling process that accelerates technological advancements. This dissertation proposes techniques for automating robust development of complex multi-fidelity models. Along with these techniques, a data-driven expert system framework is proposed that makes optimal multi-fidelity modeling choices based on the structural configuration and desired accuracy level.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/109446 |
| Date | 25 March 2022 |
| Creators | Palwankar, Manasi Prafulla |
| Contributors | Aerospace and Ocean Engineering, Kapania, Rakesh K., Schetz, Joseph A., Hammerand, Daniel C., Patil, Mayuresh J., Alexander, William Nathan |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0022 seconds