Master’s thesis deals with the design of monitoring of handling equipment. Measured quantities are the switched-on state of the forklift, the time of active use, monitoring of transported material, and the total traveled distance. For each quantity, several possible sensing methods are outlined followed by a summary of the pros and cons of each method, which served as the basis for selecting the most suitable sensor for sensing the required information. The theoretical part of the thesis outlines the proposals in terms of both theoretical aspects as well as the implementation of the sensors along with proposals for possible mounting on a forklift. The proposed application was built on top of the Workmonitor RKC2.0 development kit, which was first developed for injection molding machine monitoring equipment. The proposed solution further expands the Workmonitor RKC2.0 software with additional features, such as forklift data collection, data processing, and streaming of collected data via WiFi to a local server. The final part then describes the mounting of sensors in the forklift, the final software changes, and the presentation of the collected data.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442351 |
Date | January 2021 |
Creators | Fikar, Vratislav |
Contributors | Vobejda, Lukáš, Šedivá, Soňa |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds