In this research, a laboratory platform which has 2 degrees of freedom (DOF), the Twin Rotor MIMO System (TRMS), is investigated. Although, the TRMS does not fly, it has a striking similarity with a helicopter, such as system nonlinearities and cross-coupled modes. Therefore, the TRMS can be perceived as an unconventional and complex "air vehicle" that poses formidable challenges in modelling, control design and analysis and implementation. These issues are the subject of this work. The linear models for 1 and 2 DOFs are obtained via system identification techniques. Such a black-box modelling approach yields input-output models with neither a priori defined model structure nor specific parameter settings reflecting any physical attributes. Further, a nonlinear model using Radial Basis Function networks is obtained. Such a high fidelity nonlinear model is often required for nonlinear system simulation studies and is commonly employed in the aerospace industry. Modelling exercises were conducted that included rigid as well as flexible modes of the system. The approach presented here is shown to be suitable for modelling complex new generation air vehicles. Modelling of the TRMS revealed the presence of resonant system modes which are responsible for inducing unwanted vibrations. In this research, open-loop, closed-loop and combined open and closed-loop control strategies are investigated to address this problem. Initially, open-loop control techniques based on "input shaping control" are employed. Digital filters are then developed to shape the command signals such that the resonance modes are not overly excited. The effectiveness of this concept is then demonstrated on the TRMS rig for both 1 and 2 DOF motion, with a significant reduction in vibration. The linear model for the 1 DOF (SISO) TRMS was found to have the non-minimum phase characteristics and have 4 states with only pitch angle output. This behaviour imposes certain limitations on the type of control topologies one can ado·pt. The LQG approach, which has an elegant structure with an embedded Kalman filter to estimate the unmeasured states, is adopted in this study. The identified linear model is employed in the design of a feedback LQG compensator for the TRMS with 1 DOF. This is shown to have good tracking capability but requires. high control effort and has inadequate authority over residual vibration of the system. These problems are resolved by further augmenting the system with a command path prefilter. The combined feedforward and feedback compensator satisfies the performance objectives and obeys the constraint on the actuator. Finally, 1 DOF controller is implemented on the laboratory platform.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:341827 |
| Date | January 2001 |
| Creators | Sarvat, Mushtaq Ahmad B. |
| Publisher | University of Sheffield |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://etheses.whiterose.ac.uk/14820/ |
Page generated in 0.002 seconds