This thesis presents the use of a Field Programmable Gate Array (FPGA) to control two Commercial-Off-The-Shelf (COTS) Power Electronic Building Blocks (PEBB) configured to produce a three-phase low distortion sine wave output. The next generation warship is expected to contain more electric loads that require quality variable frequency output. A typical propulsion motor in the 40MW range will probably require the current Total Harmonic Distortion to be less than 3% (MIL-STD-1399). However, high power low distortion inverters usually have associated high cost and weight penalties. This thesis presents a parallel hybrid converter which demonstrates the use of a high power low fidelity bulk inverter with a low power high fidelity active filter. The high power low fidelity output is sourced using a six-step inverter which produces the entire fundamental current. The low power hysteresis controlled active filter section produces only cancelling harmonic current. The paralleled result is a pristine output sine wave with a 1% current Total Harmonic Distortion (THD). This solution should offer the Navy a high fidelity high power inverter without the cost and weight penalties. / US Navy (USN) author.
| Identifer | oai:union.ndltd.org:nps.edu/oai:calhoun.nps.edu:10945/2826 |
| Date | 06 1900 |
| Creators | Lund, John J. |
| Contributors | Ashton, Robert, Yun Xiaoping, Naval Postgraduate School (U.S.) |
| Publisher | Monterey, California. Naval Postgraduate School |
| Source Sets | Naval Postgraduate School |
| Detected Language | English |
| Type | Thesis |
| Format | xviii, 107 p. : col. ill. ;, application/pdf |
| Rights | Approved for public release, distribution unlimited |
Page generated in 0.0017 seconds