Bolted connections where used from the beginning of vehicle construction for joining two or more parts. The reliability of bolted connections is still a major problem. The objective of this research thesis is focused on an advanced monitoring system for bolted connections in vehicle construction. A mechanical “vibrating test bench”, which was developed by the aeronautical engineer Mr. Junkers, is being adapted, to suite the requirements of the automotive industry. It is designed according to DIN 65151 standards. The bolted connection is tightened to a specific torque to achieve the required preload forces and then exposed to an oscillating elastic shear force. The preload force and their loss are measured in relation to the number of load cycles. The ideal locking mechanism would be, if no settling occurs. Realistic in practice is the remaining of a sufficient preload force which doesn’t decry with time. The aim of this thesis is, to gain knowledge that will assist in the future control of the bolt locking procedure. The test bench can be used to verify the clamping capability of a bolted connection. With the dynamic computer-aided test system it will also be possible to test critical bolted joints and their safety, which reduces the probability of costly product recalls, or even severe cases of failure.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:9617 |
| Date | January 2010 |
| Creators | Buchmann, Macro |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Engineering, the Built Environment and Information Technology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MTech |
| Format | 1 xi, 184 leaves, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0023 seconds