A run-of-mine (ROM) ore milling circuit is primarily used to grind incoming ore containing precious
metals to a powder fine enough to liberate the valuable minerals contained therein. The ground ore
has a product particle size specification that is set by the downstream separation unit. A ROM ore
milling circuit typically consists of a mill, sump and classifier (most commonly a hydrocyclone). These
circuits are difficult to control because of unmeasurable process outputs, non-linearities, time delays,
large unmeasured disturbances and complex models with modelling uncertainties. The ROM ore
milling circuit should be controlled to meet the final product quality specification, but throughput
should also be maximised. This further complicates ROM ore grinding mill circuit control, since an
inverse non-linear relationship exists between the quality and throughput.
ROM ore grinding mill circuit control is constantly evolving to find the best control method with
peripheral tools to control the plant. Although many studies have been conducted, more are continually
undertaken, since the controller designs are usually based on various assumptions and the required
measurements in the grinding mill circuits are often unavailable. / To improve controller performance, many studies investigated the inclusion of additional manipulated
variables (MVs) in the controller formulation to help control process disturbances, or to provide some
form of functional control. Model predictive control (MPC) is considered one of the best advanced
process control (APC) techniques and linear MPC controllers have been implemented on grinding
mill circuits, while various other advanced controllers have been investigated and tested in simulation.
Because of the complexity of grinding mill circuits non-linear MPC (NMPC) controllers have achieved
better results in simulations where a wider operating region is required.
In the search for additional MVs some researchers have considered including the discrete dynamics as
part of the controller formulation instead of segregating them from the APC or base-layer controllers.
The discrete dynamics are typically controlled using a layered approach. Discrete dynamics are on/off
elements and in the case of a closed-loop grinding mill circuit the discrete elements can be on/off
activation variables for feed conveyor belts to select which stockpile is used, selecting whether a
secondary grinding stage should be active or not, and switching hydrocyclones in a hydrocyclone
cluster.
Discrete dynamics are added directly to the APC controllers by using hybrid model predictive control
(HMPC). HMPC controllers have been designed for grinding mill circuits, but none of them has
considered the switching of hydrocyclones as an additional MV and they only include linear dynamics
for the continuous elements. This study addresses this gap by implementing a hybrid NMPC (HNMPC)
controller that can switch the hydrocyclones in a cluster. / A commonly used continuous-time grinding mill circuit model with one hydrocyclone is adapted to
contain a cluster of hydrocyclones, resulting in a hybrid model. The model parameters are refitted to
ensure that the initial design steady-state conditions for the model are still valid with the cluster.
The novel contribution of this research is the design of a HNMPC controller using a cluster of
hydrocyclones as an additional MV. The HNMPC controller is formulated using the complete nonlinear
hybrid model and a genetic algorithm (GA) as the solver. An NMPC controller is also designed
and implemented as the base case controller in order to evaluate the HNMPC controller’s performance.
To further illustrate the functional control benefits of including the hydrocyclone cluster as an MV, a
linear optimisation objective was added to the HNMPC to increase the grinding circuit throughput,
while maintaining the quality specification. The results show that the HNMPC controller outperforms the NMPC one in terms of setpoint tracking,
disturbance rejection, and process optimisation objectives. The GA is shown to be a good solver for
HNMPC, resulting in a robust controller that can still control the plant even when state noise is added
to the simulation. / Dissertation (MEng)--University of Pretoria, 2018. / National Research Foundation (DAAD-NRF) / Electrical, Electronic and Computer Engineering / MEng / Unrestricted
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:up/oai:repository.up.ac.za:2263/66915 |
| Date | January 2018 |
| Creators | Botha, Stefan |
| Contributors | Craig, Ian K., Le Roux, Johan Derik, stefan.botha01@gmail.com |
| Publisher | University of Pretoria |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Rights | © 2018 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria. |
Page generated in 0.0021 seconds