In the master's thesis, there has been described and explained the principle of operation of the second generation coherence controlled holographic microscope (CCHM2) designed at the Brno University of Technology. There has also been listed theoretical description of the operation of the optical trap, together with the calculation of the forces acting on it, ways of measuring the stiffness of the optical trap and the principle of~creating a time-shared optical traps. The optical tweezers forming a separate module connectable to CCHM2 was designed. Simulation and optimization of parameters of the optical system, mechanical design, manufacturing documentation, current source to power the laser diode which allows to control the diode output power by the controller card connected to the PC was designed. The galvano-optics mirror angle is controlled by the PC card too. The optical tweezer has been designed, manufactured and tested in conjunction with the CCHM2.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230594 |
Date | January 2013 |
Creators | Straka, Branislav |
Contributors | Jákl, Petr, Dostál, Zbyněk |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds