The thesis reports the results of the research carried out towards the development of an electrooptic sensor for DC and extra low frequency electric field measurement. Available cubic electrooptic crystals were compared from the sensor sensitivity point of view. A new figure of merit was used taking into account the attenuation of the electric field in the dielectric crystal and its shape. The effect of optical activity in 23 cubic crystals was analyzed using the concept of Poincare sphere. The cubic crystals were further characterised for the charge relaxation time constant to estimate their performance in DC field measurements. Crystals of Bismuth Germanate and Lithium Niobate were identified as suitable materials for the DC field sensor. The selected crystals were found suitable at extra-low-frequencies. DC field measurements, without the rotation of the crystal, were possible only with Lithium Niobate. However, its performance was influenced to a great extent by the effect of stimulated conductivity. The quarter-wave plate and the crystal of Lithium Niobate were identified as the main sources of temperature instability. A new method of temperature compensation of the quarter-wave plate is proposed. Due to the temperature instability of Lithium Niobate, mainly attributed to the pyroelectric effect and natural birefringence, it is difficult to use the sensor in practical applications. The performance of the sensor is significantly affected by the presence of an external space charge. The proposed method of its elimination using an artificial extension of the sensing element did not reduce the space charge effect adequately. The response of the sensor in a space charge environment was found to be linear and independent of the space charge density. This enabled measurements of static fields in a unipolar environment. The direct field measurements in bipolar environment suffered from a drift which is intolerable in practical measurements. The minimum detectable electric field of this sensor in the frequency range from 1 to 200Hz was 1V/m, with a signal to noise ratio equal to 0dB and a resolution of 1V/m. The static field measurements were limited to measurements of pulses with a duration of 200s, due to a long term drift of photodetectors. The minimum detectable level of DC electric field was 2.4kV/m.
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:241648 |
Date | January 1998 |
Creators | Bordovsky, Michael |
Contributors | Balachandran, W. |
Publisher | Brunel University |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | http://bura.brunel.ac.uk/handle/2438/4957 |
Page generated in 0.001 seconds