This master‘s thesis deals with the design of battery powered soldering iron. The soldering iron will be placed in the plastic box from a conventional transformer soldering iron. First, we need to find the parameters of the original transformer soldering iron. Then design a synchronous step-down converter, driver of converter, BMS circuits, and component placement in a plastic box. The battery-powered soldering iron was successfully revived and tested, the final parameters of the converter are: voltage 0.4 V at 80 A current. The total power on the soldering wire is 32 W. Technically, this is a very interesting alternative to the classic version of the soldering iron, which can be used for assembly or repairs in poorly accessible locations.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:377105 |
Date | January 2018 |
Creators | Bartoš, Miroslav |
Contributors | Vorel, Pavel, Martiš, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds