The project is an analysis of technology production of pressure pipes made of aluminum alloys. The basis is a literary study of TIG technology, aluminum heat-tretable and non-heat-treatable materials. The flange-material is EN AW 5083 and the pipe is made of EN AW 6005A. The design of the welding is compromise between the preparation, the cleaning of the welding edges and the weld metal backing strip. Weld was made in real production. Examined impacts are evaluated on the basis of destructive and non-destructive welding test methods. After heating process of weldment material exhibits better mechanical properties. Using the economical and technological evaluation were selected sutiable proces parameters. The result is a suitable weld of the pressure vessel. Further optimization is possible through automation and robotics.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318704 |
Date | January 2017 |
Creators | Kocák, Tibor |
Contributors | Sigmund, Marian, Kubíček, Jaroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Slovak |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds