This thesis deals with the evaluation of accuracy of measurement and achieving the required accuracy level. This includes global analysis of the uncertainty evaluation, the calibration interval design and the creation of confirmation system. Basis of this work is in identification of all possible problems, which may occur during evaluation of accuracy and achieving the required accuracy level. The analysis is followed by suggested solutions for identified problems. It means namely the selection of probability distribution in case of uncertainty type A, evaluation of degrees of freedom in case of uncertainty type B, nonlinear correlation of input values, evaluation of coverage factor, the choice of method for calibration interval design and the procedure for meeting all metrological confirmation requirements. The last part of the thesis is practical measurement and result evaluation in the field of surge protection devices. This chapter demonstrates conclusions from the syntactical part.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233462 |
Date | January 2009 |
Creators | Frank, Petr |
Contributors | Kocman, Karel, Nenadál, Jaroslav, Hruška, Karel |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0125 seconds