This dissertation in the engineering study of the Engineering technology deals with the proposal of the unit production technology of two pieces of the tool for cold forming of the material X 45 NiCrMo 4, standard W. Nr material number 1. 2767. The production is on the demand and is therefore trial, because the specified tool has not been till now fabricated. The thesis describes an analysis of manufactured components, as well as a description of the material used, a description of the available technologies that were used and a design of production technology. The production will include these methods: turning, grinding, electro erosive deepening and polishing.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230268 |
| Date | January 2012 |
| Creators | Svoboda, Lukáš |
| Contributors | Kubík, Roman, Kalivoda, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds