This Master´s thesis focuses on design and implementation of programmable attenuator. The main aim of this thesis is to create an electronical device that provide continuous setting of attenuation value in the range between 0–150 dB. Setting a value from the range can be performed using buttons and set values are shown on display. For this thesis an attenuator with working frequency between 0–6 GHz was chosen and four–layer printed circuit board was designed. As a result the device is fitted with an 8bit microcontroller ATmega328P–PU using five 6bit digital attenuators connected in series with manual and program settings of attenuation from 0–157,5 dB with step of 0,5 dB. Data are shown on a build–in display. The application for remote settings and value reading over integrated USB (Universal Serial Bus) interface, was created in C#. In conclusion of this thesis there is a measurement evaluation of attenuation measurement performed on the device.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:413091 |
Date | January 2020 |
Creators | Pokorný, Rostislav |
Contributors | Mašek, Pavel, Štůsek, Martin |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds