Return to search

Pullout Resistance of Welded Wire Mats Embedded in Soil

Welded wire mesh has been used in the past as soil reinforcement in the construction of reinforced soil embankments. Involved in the design of these embankments is the external and internal stability. The internal stability has two failure mechanisms; tension failure and pullout failure of the welded wire mesh.
This paper presents the results of laboratory tests on different sizes of welded wire mats embedded in different types of soils. These tests were performed on mats that are much larger than in previous tests. These tests measured the pullout resistance as a function of the number of embedded wires, the diameter of the wire, and the overburden pressure. This data is plotted to allow design of reinforced soil embankments in various types of soils and to compare the results with theoretical relationships.

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-8625
Date01 May 1984
CreatorsNielsen, Mark R.
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact digitalcommons@usu.edu.

Page generated in 0.0021 seconds