A study of existing research shows a need for an investigation of the bond properties of anchorage systems for GFRP bars including; straight, anchor heads and bends. The standard pullout test was modified to improve testing efficiency, accommodate bend tests, as well as reduce variability of concrete properties across specimens. Based on the results of the experimental work it was concluded that the surface profile of GFRP bars influences the post-peak phase of the bond stress-slip curve. It was also found that GFRP bars with anchor heads would still require a considerable embedment length to develop the bars’ full strength. Bend strengths of three GFRP manufacturers were determined to be between 58 and 80% of the strength of the straight portion of the same bar, while the development length of a two legged stirrup was found to be between five and ten times the bar diameter for all bar types.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/33573 |
| Date | 27 November 2012 |
| Creators | Vint, Lisa |
| Contributors | Sheikh, Shamim A. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0023 seconds