A flexible nanofibrous PVDF-BaTiO3 composite material is prepared for impact sensing and biomechanical energy harvesting applications. Dielectric polyvinylidene fluoride (PVDF) and barium titanate (BaTiO3)-PVDF nanofibrous composites were made using the electrospinning process based on a design of experiments approach. The ultrasonication process was optimized using a 2k factorial DoE approach to disperse BaTiO3 particles in PVDF solution in DMF. Scanning electron microscopy was used to characterize the microstructure of the fabricated mesh. The FT-IR and Raman analysis were carried out to investigate the crystal structure of the prepared mesh. Surface morphology contribution to the adhesive property of the composite was explained through contact angle measurements. The capacitance of the prepared PVDF- BaTiO3 nanofibrous mesh was a more than 40% increase over the pure PVDF nanofibers. A comparative study of dielectric relaxation, thermodynamics properties and impact analysis of electrospun polyvinylidene fluoride (PVDF) and 3% BaTiO3-PVDF nanofibrous composite are presented. The frequency dependent dielectric properties revealed micro structural features of the composite material. The dielectric relaxation behavior is further supported by complex impedance analysis and Nyquist plots. The temperature dependence of electric modulus shows Arrhenius type behavior. The observed non-Debye dielectric relaxation in electric loss modulus follows a thermally activated process which can be attributed to a small polaron hopping effect. The particle induced crystallization is supported with thermodynamic properties from differential scanning calorimetric (DSC) measurements. The observed increase in piezoelectric response by impact analysis was attributed to the interfacial interaction between PVDF and BaTiO3. The interfacial polarization between PVDF and BaTiO3 was studied using density functional theory calculations and atomic charge density analysis. The results obtained indicates that electrospinning offers a potential way to produce nanofibers with desired crystalline nature which was not observed in molded samples. In addition, BaTiO3 can be used to increase the capacitance, desired surface characteristics of the PVDF nanofibers which can find potential application as flexible piezoelectric sensor mimicking biological skin for use in impact sensing and energy harvesting applications.
Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc1752367 |
Date | 12 1900 |
Creators | Ramesh, Dinesh |
Contributors | D'Souza, Nandika, Choi, Wonbong, Shi, Sheldon, Choi, Tae-Youl |
Publisher | University of North Texas |
Source Sets | University of North Texas |
Language | English |
Detected Language | English |
Type | Thesis or Dissertation |
Format | xii, 127 pages, Text |
Rights | Public, Ramesh, Dinesh, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved. |
Page generated in 0.013 seconds