Seismic isolation is a method of earthquake resistant design which has been proven to effectively reduce the damaging effects of earthquakes on buildings as well as the contents within them. However, traditional implementation of an isolation system tends to be expensive. For new construction, rigid diaphragms above and below the isolation layer and construction of a seismic gap contribute to expenses, while retrofit applications also require excavation beneath the building and may need extensive foundation work. To mitigate these major costs bearings may be placed on the tops of columns, forgoing the construction of a seismic gap, additional rigid diaphragm, and foundation work. However, columns under the isolation layer may be flexible, changing the bearing end conditions traditionally assumed.
To investigate the effects of flexible end conditions on elastomeric bearings, an analytical model that accounts for translation and rotation of both endplates was developed based on Haringx's theory. The derivation accounts for compressibility of the rubber and results in a simple stiffness matrix. To evaluate the model, an experimental program testing column-bearing subassemblies under quasi-static cyclic conditions was conducted. Experimental findings show that flexible end conditions can significantly reduce the lateral stiffness of elastomeric bearings. Simulations with the theoretical model compare well under small deformations, but elastic softening of the moment-rotation relationship causes theoretical results to diverge from experimental with larger endplate rotations.
The effectiveness of column-top isolation as a retrofit strategy was investigated through nonlinear time history analyses of a moment resisting frame designed to the 1965 National Building Code of Canada and retrofitted with column-top isolation. The frame was simulated under ground motions representative of current hazards and showed that the retrofit resulted in significant reductions in interstory drifts and floor accelerations. Yielding was observed throughout the original frame under maximum considered earthquakes, while the retrofit frame remained elastic. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/19940 |
| Date | January 2016 |
| Creators | Crowder, Adrian |
| Contributors | Becker, Tracy, Civil Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds