Return to search

Mechanical properties of sheep skin in compression

The mechanical properties of sheep skin in compression were investigated by two methods; a stress strain method and a cyclic stress fatigue method. It was shown that the skin behaves like a linear viscoelastic material for small loads, however, for large loads it behaves nonlinearly and the strain is essentially a logarithmic function of load. The effect on the skin of treatment with several solutions and enzymes were also investigated and characterized statistically.
By the cyclic stress fatigue method the dependency of sheep skin on the previous history, which is axiomatic for biological materials, was investigated and it was shown that the fatigue behaviour of sheep skin is essentially a logarithmic function of time.
Based on the experimental data, a mechanical model for sheep skin was proposed and the simulation of the model was carried out using an analog computer. By comparing the experimental data with the simulation results, the proposed model was shown to represent the experimental results satisfactorily. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/35308
Date January 1969
CreatorsSakata, Kenji
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.002 seconds