With the proliferation of renewable energy and its integration into the modern power grid, we face some new issues. Aside from the increased switching rate, which results in faster dynamic behavior, realistic models for these Inverter-Based Resources (IBRs) are not widely available. This complicates researching the behavior of this quickly changing system, and without proper models, simulations may not be totally reliable. To address this, it is recommended that measurement data be used, which includes the entire grid and all of its unique characteristics. Signal processing techniques have been employed exclusively to construct spectrograms, which are time-frequency representations of a signal's spectral information. These spectrograms show ridges that represent the system's changing modes. It can be extremely beneficial to track these modes and generate labeled data representing the evolution of modes as the system evolves. This labeled data can aid in the development of correlation and causation hypotheses linking specific abnormal behaviors to proximity to instability. This can also assist analyze these IBRs and identify flaws in their modeling. This thesis describes a step-by-step process for creating spectrograms, reducing them for better visualization, and then estimating mode evolution with a ridge-tracking algorithm based on penalized jump criteria. The results show that the tracker works effectively with both synthetic and real PMU data. / Master of Science / By 2050, the number of electric cars on the road will increase almost tenfold, and renewable energy will make up almost 50% of the global power mix. While this is great news for the environment, it also poses new challenges to the power sector in ensuring the reliable delivery of clean energy. To address this, we need to collect real-time information about the system. A spectrogram is a visual representation of the power grid's dynamic behavior, providing essential information about frequency and power. Despite its extensive use in biomedical data, this tool is not used much in the power system industry. Spectrograms can be used as a forensic tool or preventive measure to detect system instability. Our project aims to track the system's dynamic behavior using ambient data, which is shown to be rich in information. The proposed algorithm suggests a detailed step-by-step methodology to use this tool for system identification and monitoring. The work's novelty lies in the tracking algorithm developed to identify and track the spectral components in a time-frequency representation.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/119423 |
| Date | 12 June 2024 |
| Creators | Dixit, Vishal Sateesh |
| Contributors | Electrical Engineering, Centeno, Virgilio A., Liu, Chen-Ching, Mishra, Chetan, Kekatos, Vasileios |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0021 seconds