This Diploma thesis presents possible proposals of welds number reduction frame doors for rail vehicles welded from profiles from aluminium alloy EN AW 6060, which is heat treated by temper T66. Profiles are welded by TIG process with additional material S Al 5087 (AlMg4,5MnZr). The heat treatment by the welding cycle causes a change in structure of basic material and decrease of mechanical properties due to dissolution of precipitates. To measure the necessary mechanical properties of the material after welding a tensile test was performed on the delivered samples. The resulting values from tensile test were subsequently used as cut – off values in the new door frame design by FEM simulation in Virtual Performance Solution software with PAM – Crash extension. The newly designed frame was welded according to the necessary welding procedure specifications, which are also part of the thesis. The conclusion is devoted to the economic evaluation of the current and new design of the door frame.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399353 |
| Date | January 2019 |
| Creators | Šplíchal, Jan |
| Contributors | Vaněk, Mojmír, Sigmund, Marian |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds