Return to search

Application of sound source separation methods to advanced spatial audio systems

This thesis is related to the field of Sound Source Separation (SSS). It addresses the development
and evaluation of these techniques for their application in the resynthesis of high-realism sound scenes by
means of Wave Field Synthesis (WFS). Because the vast majority of audio recordings are preserved in twochannel
stereo format, special up-converters are required to use advanced spatial audio reproduction formats,
such as WFS. This is due to the fact that WFS needs the original source signals to be available, in order to
accurately synthesize the acoustic field inside an extended listening area. Thus, an object-based mixing is
required.
Source separation problems in digital signal processing are those in which several signals have been mixed
together and the objective is to find out what the original signals were. Therefore, SSS algorithms can be applied
to existing two-channel mixtures to extract the different objects that compose the stereo scene. Unfortunately,
most stereo mixtures are underdetermined, i.e., there are more sound sources than audio channels. This
condition makes the SSS problem especially difficult and stronger assumptions have to be taken, often related to
the sparsity of the sources under some signal transformation.
This thesis is focused on the application of SSS techniques to the spatial sound reproduction field. As a result,
its contributions can be categorized within these two areas. First, two underdetermined SSS methods are
proposed to deal efficiently with the separation of stereo sound mixtures. These techniques are based on a
multi-level thresholding segmentation approach, which enables to perform a fast and unsupervised separation of
sound sources in the time-frequency domain. Although both techniques rely on the same clustering type, the
features considered by each of them are related to different localization cues that enable to perform separation
of either instantaneous or real mixtures.Additionally, two post-processing techniques aimed at
improving the isolation of the separated sources are proposed. The performance achieved by
several SSS methods in the resynthesis of WFS sound scenes is afterwards evaluated by means of
listening tests, paying special attention to the change observed in the perceived spatial attributes.
Although the estimated sources are distorted versions of the original ones, the masking effects
involved in their spatial remixing make artifacts less perceptible, which improves the overall
assessed quality. Finally, some novel developments related to the application of time-frequency
processing to source localization and enhanced sound reproduction are presented. / Cobos Serrano, M. (2009). Application of sound source separation methods to advanced spatial audio systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8969

Identiferoai:union.ndltd.org:upv.es/oai:riunet.upv.es:10251/8969
Date03 December 2010
CreatorsCobos Serrano, Máximo
ContributorsLópez Monfort, José Javier, Universitat Politècnica de València. Departamento de Comunicaciones - Departament de Comunicacions
PublisherUniversitat Politècnica de València
Source SetsUniversitat Politècnica de València
LanguageEnglish
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis, info:eu-repo/semantics/acceptedVersion
SourceRiunet
Rightshttp://rightsstatements.org/vocab/InC/1.0/, info:eu-repo/semantics/openAccess

Page generated in 0.0026 seconds