Return to search

[en] SOFTWARE ENGINEERING FOR OPEN SOURCE SOFTWARE / [pt] ENGENHARIA DE SOFTWARE PARA SOFTWARE LIVRE

[pt] Software livres têm despertado bastante atenção, não apenas
devido a popularidade obtida por alguns destes como o Linux
e o Apache, mas também pela forma singular como estes
sistemas são desenvolvidos e sua quantidade de
adeptos. No entanto, em alguns projetos de software livre,
a documentação existente dificulta a entrada de novos
participantes, já que devido a informalidade do
processo de desenvolvimento deste tipo de software, é comum
que a documentação do sistema não receba muita atenção.
Este trabalho colabora para um melhor entendimento do
desenvolvimento de software livres, relacionando-o com as
questões de evolução de software. Será apresentada uma
proposta utilizada no software livre C e L para documentar em
termos da aplicação o código do sistema, utilizando-se do
conceito de cenários. Será mostrado através de um protótipo
que um software seguindo esse padrão proposto pode produzir
uma documentação que torna mais fácil seu entendimento
para novos participantes do projeto. / [en] This thesis presents an introduction on the use of the
thermal desorption technique that is based on the direct
heating of the soil, for the remediation of contaminated
areas. Heat propagation through soils can be mathematically
simulated using coupled heat-moisture transfer theories. In
order to make this simulation possible it is necessary to
identify the required parameters: hydraulic conductivity as
a function of volumetric water content, thermal
conductivity as a function of volumetric water content,
volumetric heat capacity, and soil-water characteristic
curve. One technical description of such parameters is
presented. Two different kinds of soils were used, one clay-
sand (CH) and one sandclay (SC). A study physico-chemical
was done talking into consideration the temperature effect
on the soils with X-Ray, electron microscopic investigation,
CTC, Atterberg Limits and at the particle size
distribution. The study was done on pre-heated soils with
temperatures ranging from 20 Celsius Degrees to 300 Celsius Degrees. Equipments and
methodologies have been especially developed for the
study of the thermo-hydraulics proprieties. The laboratory
tests program consisted of hydraulic conductivity,
retention curves and deformability, taking into account
the temperature effects. During the tests it was observed
that all parameters were temperature dependent. The thermal
parameters, thermal conductivity and heat capacity were
studied for both soils.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:4854
Date03 May 2004
CreatorsROBERTO DE HOLANDA CHRISTOPH
ContributorsJULIO CESAR SAMPAIO DO PRADO LEITE
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguageEnglish
TypeTEXTO

Page generated in 0.0026 seconds