Return to search

[en] BEHAVIOR OF STRUCTURAL STEEL API 5L X65 AFTER EXPOSURE TO HYDROGEN: AN APPROACH BASED ON DUCTILE FRACTURE / [pt] COMPORTAMENTO DE AÇO ESTRUTURAL API 5L X65 APÓS EXPOSIÇÃO AO HIDROGÊNIO: UMA ABORDAGEM BASEADA NA FRATURA DÚCTIL

[pt] Aços ARBL são cada vez utilizados na construção de linhas de dutos
(pipelines) devido aos benefícios de pressões de linha mais elevadas, redução de
peso do tubo, e, principalmente, diminuição dos riscos de falhas estruturais.
Entretanto, tais tubos, em serviço offshore, podem ser fragilizados pela presença
de H2S no fluido transportado. Sendo assim, esta pesquisa estudou a influência
do hidrogênio no comportamento à fratura do aço API 5L X65 por ensaios de
tenacidade à fratura (CTOD e Integral J) no aço com e sem hidrogênio a – 30 Graus Celsius,
o que possibilitou uma análise comparativa das duas condições. Pelos
parâmetros CTOD e Integral J, se verificou ausência de redução da tenacidade à
fratura do aço X65, uma vez que os valores dos parâmetros citados para a
condição mais severa de hidrogenação foram similares àqueles encontrados na
condição de referência. O efeito degradante provocado pelo hidrogênio foi
associado a uma maior propagação de trinca durante os ensaios de tenacidade.
Isto indica que o hidrogênio pode causar efeitos contraditórios no
comportamento à fratura do material que estão relacionados ao tipo de
investigação realizada para análise do comportamento mecânico do material
(macroscópica ou microscópica), da microestrutura e às variáveis experimentais
adotadas nos ensaios, tais como taxa de deformação, concentração de hidrogênio
e nível de tensões. / [en] HSLA steels are increasingly used in the construction of pipelines due to
its excellent mechanical properties, resulting in adjustments to higher line
pressures, weight reduction of the tube, and mainly risk decrease of structural
failure. However, such pipes, when in offshore operation, can be embrittled by
the presence of H2S in the transported fluid. So that, this research aimed to study
the influence of hydrogen on the fracture behavior of API 5L X65 steel with and
without hydrogen at –30 Celsius Degree, which enabled a comparative analysis of the two
conditions. Based on the CTOD and J Integral parameters, it was found that
there was no reduction in the toughness of the X65 steel, since the CTOD and J
related to the most severe hydrogenation conditions were similar to those found
in the reference condition. The degrading effect caused by hydrogen was
associated with a higher crack propagation during the toughness tests. This
indicates that hydrogen can cause contradictory effects on the fracture behavior
of the material. The discrepant effects are related to the type of research
undertaken to analyze the mechanical behavior of the material (macroscopic or
microscopic), microstructure and experimental variables adopted during the
tests, such as strain rate, hydrogen concentration, stress levels.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:25057
Date17 August 2015
CreatorsGILVANIA TERTO ALVES
ContributorsMARCOS VENICIUS SOARES PEREIRA
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0017 seconds