Return to search

[en] FRACTURE TOUGHNESS OF THE WELDED JOINT GOTTEN THE SUBMERGED ARC OF STEEL API 5L GRADE X80 / [pt] TENACIDADE A FRATURA DA JUNTA SOLDADA OBTIDA A ARCO SUBMERSO DE AÇO API 5L GRAU X-80

[pt] Este trabalho de tese faz parte de um estudo de
desenvolvimento de aço API X80 e o objetivo deste trabalho
foi avaliar o crescimento estável de uma trinca
superficial localizada na zona termicamente afetada (ZTA)
da junta longitudinal obtida pelo processo de arco
submerso. Foram estudados dois aços API 5L X80
pertencentes aos sistemas NbCr e NbCrMo. Considerando que
dutos operam sob altas pressões, gerando um estado de
tensão severo sob um defeito ou trinca presente no
material pode ocorrer falha da estrutura. Deste modo,
torna-se necessário estudar a natureza destas trincas e o
potencial de crescimento, permitindo assim controlar e
prever o crescimento estável da trinca.
Para avaliar o comportamento da trinca, foi utilizada a
metodologia de integral J. Esta metodologia objetiva
avaliar e prever o comportamento à fratura. Os resultados
esperados no ensaio de integral J é a obtenção da curva de
resistência J-R e o valor do JIc, que representa o valor
de J no início do crescimento estável de trinca. / [en] This work of thesis is part of a study of steel
development API X80 and the objective of this work was to
evaluate superficial the steady growth of one crack
located in the heat affected zone (HAZ) of together the
longitudinal one gotten by the process of submerged arc.
Two pertaining steel API had been studied 5L X80 to the
systems NbCr and NbCrMo. Considering that pipes operate
under high pressures, generating a severe state of tension
under a present defect or crack in the material
imperfection of the structure can occur. In this way, one
becomes necessary to study the nature of these cracks and
the potential of growth, being thus allowed to control and
to foresee the steady growth of crack. To evaluate the
behavior of crack, the methodology of integral J was used.
This objective methodology to evaluate and to foresee the
behavior to the breaking. The results waited in the assay
of integral J are the attainment of the curve of
resistance J-R and the value of the JIc, which represents
the value of J in the beginning of the steady growth of
crack.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:8193
Date25 April 2006
CreatorsMARCELO TOLEDO VALIM
ContributorsIVANI DE SOUZA BOTT
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguageEnglish
TypeTEXTO

Page generated in 0.0012 seconds