This thesis deals with the control system of two-seater aircraft corresponding to CS-23 Level 2. First load calculations of each control surface are performed using the proses described in previous CS-23 regulation. This load is calculated trought the steering mechanism to control elements in cockpit. The resulting forces on the control elements are compared with the requi-rements in CS-23. Because the steering forces meets requirements is not necessary to propose changes in steering kinematics. However, there are further suggested ways of adjusting the control in case the external load would increase during further development of the airplane. At the end, the strength calculation of entire mechanism is preformed.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:377520 |
Date | January 2018 |
Creators | Lontras, Martin |
Contributors | Bartoněk, Jaroslav, Jebáček, Ivo |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds