Return to search

The Resonance Characteristics of Solidly Mounted Resonators with 1/4 and 1/2 £f Mode Configurations

In this thesis, we emphasized on fabrication and anlysis of 1/4 and 1/2 £f mode solidly mounted resonators. First, the reactive RF magnetron sputter used to deposit the highly c-axis-oriented aluminum nitride (AlN) piezoelectric films under different parameters. The various c-axis tilt angle also used it by altering the distance between substrate and target to investigate the characteristics.
To accomplish the two modes of different pairs of Bragg reflector, the RF/DC sputter system is adopted alternating layers of quarter-wavelength Mo and SiO2 thin films by different sequence. Finally, depositing the highly c-axis-oriented AlN on reflectors to complete the 1/4 and 1/2 £f mode SMR.
The AlN thin film achieve a very low roughness of 1.783nm under AFM measurement, the FWHM of XRD(002) peak is 3.507¢Xand SEM images also exhibit a highly oriented c-axis structure.
The optimum frequency responses of 1/2 £f mode SMR is obtained with return loss of -57.23dB at 4 pairs reflectors,which for 1/4 £f mode SMR is -30.68dB at 3 pairs. The maximum electromechanical coupling coefficient (Kt2) of 1/2 £f mode SMR is 7.88%, but the quality factor (Q) of 1/4 £f mode SMR is 4231.29.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0826108-140019
Date26 August 2008
CreatorsLi, Sin-Ren
ContributorsRURNG-SHENG GUO, Ying-Chung Chen, Mau-Phon Houng, Jow-Lay Huang, SHOOU-JINN CHANG
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0826108-140019
Rightsnot_available, Copyright information available at source archive

Page generated in 0.0018 seconds