The master’s thesis submits a technological project of production of splined sleeve used in automotive as a component of propeller shaft. The part is made of steel ČSN 11 523 by bulk forming technology in an annual production series of 20 000 pieces. Production process was designed in four operations, after the second operation there was recrystallization annealing included for regeneration of plasticity before following extrusion. There were made technological calculations for these production operations. Operations were projected to be done by common one-operation press machines available in local manufacturing facility. For all the operations were designed functional tools and tools setups. In conclusion, there was performed technical-economic evaluation. As emerged from this evaluation the final amount of total production costs for one piece is 131,- Kč. When 9 393 pieces are produced, the production series reaches to the break-even point and then the profit starts to be generated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:432774 |
| Date | January 2020 |
| Creators | Vališ, Ondřej |
| Contributors | Lidmila, Zdeněk, Císařová, Michaela |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds