This thesis investigates the performance of concentrically braced zipper frames through complementary experimental and numerical simulation approaches and proposes a design methodology for an innovative bracing scheme labeled as the suspended zipper frame. The suspended zipper frame intends to ensure that the top-story hat truss remains elastic, resulting in very ductile behavior of the structure. In the first part of the work, a three-story prototype frame was designed based on a preliminary design method. Three tests were conducted on one-third scale models of this prototype to verify the design procedure and assess the system performance under very different load histories. Comparisons of the results between analyses and experiments validated the partial-height zipper mechanism envisioned, and led to refinements of the design procedure and establishment of appropriate design details for these frames. The design and performance of this structural system are illustrated with three-, nine-, and twenty-story buildings designed for the same masses as those used in the SAC studies for the Los Angeles area. The proposed design strategy results in suspended zipper frames having more ductile behavior and higher strength than typical zipper frames. In addition, the suspended zipper frames also appear to reduce the tendency of chevron-braced frames to form soft stories and to improve seismic performance without having to use overly stiff beams. Finally, an explanation of the design philosophy as well as code language format of the design procedure is given.
Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/13940 |
Date | 20 November 2006 |
Creators | Yang, Chuang-Sheng |
Publisher | Georgia Institute of Technology |
Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
Language | en_US |
Detected Language | English |
Type | Dissertation |
Format | 4569354 bytes, application/pdf |
Page generated in 0.0019 seconds