The use of a periodic rectangular groove profile to eliminate specular reflection from a conducting surface is studied. The concentration
of all scattered power in the principal backscatter mode, i.e., in a direction opposite to the incident wave, is possible under plane wave
illumination if the period d = λ/(2sinθ₁): where θ₁. is the angle of
incidence from the surface normal and A is the wavelength; and the width and depth of the grooves are properly chosen. An analytical and numerical study of the scattering is carried.out for arbitrary polarization to determine these groove dimensions and the effect of systematic errors in them. Experiments were performed at 35 GHz using brass plates of finite size under non-plane wave illumination. The experimental results show that the plates behave essentially as predicted. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate
Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/20532 |
Date | January 1977 |
Creators | Heath, James William |
Source Sets | University of British Columbia |
Language | English |
Detected Language | English |
Type | Text, Thesis/Dissertation |
Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0015 seconds