Fractures of the lower leg are common during frontal automotive collisions and military blasts. These two scenarios cause injury via a similar axial loading mechanism. The majority of previous studies that have conducted axial impact tests to determine the injury limits of the lower leg have simulated automotive impacts; however, due to the viscoelastic nature of bone, it remains unclear whether limits from automotive experiments can be applied to higher-rate blasts. The purpose of this work was to study the effect of load rate on the fracture tolerance of the tibia during these two scenarios.
The instrumentation required to quantify impacts to lower leg specimens using a pneumatic impactor was developed, and included capturing synchronized load, acceleration, velocity, strain, and high-speed video data. Subsequently, impact testing was performed on twelve human cadaveric tibias. Velocities and impact durations were matched to literature values to simulate an automotive collision and a military blast. Force and impulse were found to significantly differ between the two conditions, while kinetic energy did not. Specimens impacted at higher rates required greater forces to achieve fracture, which suggests that load rate needs to be accounted for in future injury criteria. Two commonly used anthropomorphic test device lower legs were tested under similar loading conditions, and new thresholds were developed for these devices. Finally, a finite element model was tested for its ability to simulate loading of the tibia during varied impacts. This model can be used to assess injury risk and protective measures for the leg.
Understanding the effect of load rate on the tibia’s fracture tolerance is essential when developing injury thresholds that can be applied to impacts of various rates. The results of this work can be used in the future to design and evaluate improved protective systems to be implemented in vehicles. / Thesis / Master of Applied Science (MASc) / Fractures of the lower leg are common during frontal automotive collisions and military blasts. Due to the viscoelastic nature of bone, it remains unclear whether safety limits from automotive experiments can be applied to higher-rate blasts. The purpose of this work was to study the effect of load rate on the fracture tolerance of the tibia during these two scenarios.
Impact testing was performed on twelve human cadaveric tibias. Specimens impacted at higher rates required greater forces to achieve fracture, which suggests that load rate needs to be accounted for in future injury criteria. Two commonly used crash test dummy lower legs were tested under similar loading conditions, and a finite element model was developed and tested to simulate loading of the tibia during high-rate impacts.
The results of this work can be used to design and evaluate improved protective systems to be implemented in vehicles.
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/20966 |
Date | January 2017 |
Creators | Martinez, Alberto A |
Contributors | Quenneville, Cheryl E, Mechanical Engineering |
Source Sets | McMaster University |
Language | English |
Detected Language | English |
Type | Thesis |
Page generated in 0.2138 seconds