Return to search

Development of Prediction Methods for the Lateral Anchorage Requirements in Metal Building Roof Systems

Metal building roof systems with C- or Z-section purlins require restraint to resist lateral forces developed within the roof system under gravity loads. The currently available procedures for predicting these forces have been shown to be inaccurate for sloped roofs and difficult to apply to roof configurations with multiple points of anchorage. A new method has been developed that builds on the previous research and accurately addresses roof slope as well as the use of multiple anchorage devices of finite stiffness. The development of this method relied on a stiffness model, similar to that used by previous researchers, which was updated and calibrated to the results of recently completed tests. The calculation procedure explicitly addresses the location and stiffness of anchorage devices as well as the inherent stiffness of the purlin system to accurately distribute the anchorage forces. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/32382
Date23 May 2007
CreatorsSears, Jeffrey M.
ContributorsCivil Engineering, Murray, Thomas M., Plaut, Raymond H., Easterling, William Samuel
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
Relationetd-Sears1.pdf, etd-SearsApp.pdf

Page generated in 0.0016 seconds