Return to search

Soft error aware physical synthesis

To allow accurate analysis of Soft Errors by Electronic Design Automation (EDA) tools, analytical models were developed to estimate electrical characteristics of the single event. The Ambipolar-Diffusion-With-Cutoff (ADC) model was extended in this work to model charge sharing, thus allowing accurate charge estimation by EDA tools An Single Event Transient (SET) pulse width estimation methodology was developed to model the Standard Cells response to the soft error. Combining these models along with circuit masking probabilities, the circuit soft-error cross-section is estimated. These soft error models are then integrated into an automatic standard cell placement tool based on Quadratic Optimization. Results show the impact of Physical Synthesis electrical correction techniques, such as Buffering, Gate Cloning and Gate Sizing, to the circuit soft error cross-section. Furthermore, an algorithm to reduce the circuit soft error cross-section by optimizing the Tap Cell placement was also developed and demonstrated. Results from this thesis provide key insights to control the circuit soft error cross-section during the Physical Synthesis design flow for integrated circuits at the most advanced technology nodes.

Identiferoai:union.ndltd.org:VANDERBILT/oai:VANDERBILTETD:etd-11242015-013303
Date04 December 2015
CreatorsAssis, Thiago Rocha de
ContributorsDr. Bharat L. Bhuva, Dr. Aniruddha S. Gokhale, Dr. Shi-Jie Wen, Dr. William H. Robinson, Dr. Ronald D. Schrimpf
PublisherVANDERBILT
Source SetsVanderbilt University Theses
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.library.vanderbilt.edu/available/etd-11242015-013303/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to Vanderbilt University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0019 seconds