<p>Variable speed AC drives have become the new standard for high performance drive systems. Very high power traction drives present a particular challenge for AC drive technology because of the simultaneous need for high-torque vibration-free operation at standstill, traction-limited dynamic braking, and high speed operation.</p> <p>In this work, two independently controlled cycloconverters are used with a wound rotor machine to provide a double fed drive system that overcomes the frequency limitations of the cycloconverters and provides a stable high power drive, with potential for rapid torque response and power factor control.</p> <p>A new 'Jitter' control method is derived for the firing angle control of the cycloconverter. This method effectively spreads the cycloconverter output harmonics over a broader spectrum and thus minimizes the filtering requirements.</p> <p>The double fed motor (DFM) equations are applied to the DFM circle diagram and a simulation program has been written to plot the circle diagram and give a geometric interpretation of the developed torque. A new algorithm is proposed using δν, the pseudo torque angle, to give direct control of the torque using only position feed-back. A novel frequency hopping algorithm is also derived that allows the cycloconverters to be operated at high frequencies without generating harmonic torques.</p> <p>A dual cycloconverter drive was built to verify the stability and torque-speed performance of such a system. Reliable operation was achieved by using bank switching sensors based on detecting the reverse bias across a series connected diode, and by short circuit detection circuits with automatic reset facilities. The control software displays system status information on the screen, with on-line parameter modification, and provides a complete range of manual and automatic modes of operation to facilitate system development and testing.</p> / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/6661 |
| Date | 04 1900 |
| Creators | Brown, Murray Gerald |
| Contributors | Szabados, Barna, Electrical Engineering |
| Source Sets | McMaster University |
| Detected Language | English |
| Type | thesis |
Page generated in 0.0024 seconds