Return to search

Electrochemical polychlorinated biphenyls immunosensor based on functionalized polyaniline nanocomposite

Thesis (MTech (Chemistry))--Cape Peninsula University of Technology, 2015. / Immunosensors are analytical devices comprising antibody (Ab) molecules intimately integrated with electronic physicochemical transducers. Abs are responsible for specific recognition of an analyte so called antigen (Ag) while transducers are responsible for the conversion of chemical changes brought about by Ab-Ag interactions into measurable and processable signal. Amongst the many analytical tools, immunosensors have shown outstanding performance in applications in fields such as clinical diagnostics, agricultural purposes and environmental monitoring. They have come in place of the many conventional analytical methods which showed a number of disadvantages; high cost and longer time of operation, and requirement of highly knowledgeable personnel. On the other hand, immunosensors have shown potential to overcome these constraints. Their advantages include possibilities of portability, miniaturization, and simplified procedures. Of the possible fields of immunosensor applications, this study focussed on the environmental aspect. The safety of the environment is good for the well-being even though there are still some environmental threats that exist. Polychlorinated biphenyls (PCBs) have reportedly been found to be some of the potential substances to pose such threats due to their toxic and persistent behaviour. In this study, we have developed an electrochemical immunosensor as an analytical tool for the analysis and monitoring of PCBs. The development was based on the use of silver nanoparticles-doped polyaniline (PANI/Ag NPs) for modification of an electrode as a process for fabrication of the transducer. The PANI/Ag NPs composite was deposited on the glassy carbon (GC) and platinum (Pt) electrodes by oxidative electropolymerization of aniline in the presence of Ag NPs in 1 M HCl using cyclic voltammetry (CV) by ramping the potential from -0.1 to 1.4 V at 50 mV/s. The composite was then characterized and evaluated as a potential material for electrochemical transduction. Evaluation was on electroactivity, which is the main property of interest for materials used in the fabrication of electrochemical devices. The PANI composites were characterized using spectroscopic (FTIR), microscopic (TEM) and electrochemical CV techniques. Results confirmed the formation of PANI in its emeraldine form and the presence of Ag NPs. Characteristic functional groups and peaks of PANI were observed in FTIR and CV respectively. TEM micrograms showed one dimensional nanofibric tubes and crystalline-like structure of the composite. The incorporation of Ag NPs was indicated by the transition from the amorphous (PANI) to crystalline (PANI/Ag NPs) structure accompanied by increase in size as well as smoothness of the tubes. EDS-TEM counts increase of the chlorine (Cl) peaks is due to the closeness of these peaks to those of Ag, thus confirming incorporation of Ag NPs.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cput/oai:localhost:20.500.11838/2321
Date January 2015
CreatorsKhesuoe, Malefetsane Patrick
ContributorsMatoetoe, MC, Matoetoe, MC
PublisherCape Peninsula University of Technology
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Rightshttp://creativecommons.org/licenses/by-nc-sa/3.0/za/

Page generated in 0.002 seconds