This master’s thesis is focused on calculation, simulation and experimental verification of electrodynamic forces acting upon movable contact piece of MCCB and experimental current carrying path. A short description of low voltage circuit breakers is briefly discussed in first chapter. Second chapter is focused upon contact system analysis of particular MCCB with thermomagnetic trigger. A hardness of contact materials is briefly described. A detailed analytical calculations were used to determine electrodynamic forces in MCCB. A FEM simulation in ANSYS Maxwell was carried out for comparison with analytical results. An experimental apparatus was designed and built for verification of constriction repulsion force, so called Holm’s force. A series of measurements is subsequently performed on proposed apparatus and results are compared with results from previous chapters.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241105 |
Date | January 2016 |
Creators | Šic, Pavel |
Contributors | Valenta, Jiří, Bušov, Bohuslav |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0331 seconds