Return to search

[pt] AVALIAÇÃO DO TRANSPORTE DE MERCÚRIO (HG) ENTRE OS COMPARTIMENTOS AMBIENTAIS AR, ÁGUA E SEDIMENTO DA BAÍA DE SEPETIBA POR MEIO DE UM MODELO DE BALANÇO DE MASSA / [en] MERCURY (HG) TRANSPORT ASSESSMENTS BETWEEN THE AIR, WATER AND SEDIMENT ENVIRONMENTAL COMPARTMENTS AT SEPETIBA BAY EMPLOYING A MASS BALANCE MODEL

[pt] A contaminação causada por diversos metais, dentre eles o mercúrio
causa diversos problemas de saúde devido a sua bioacumulação, portanto
foi necessária a construção de modelos para determinar a sua concentração.
Alguns modelo multimeios foram criados para determinar através do tempo
a contaminação de metais. Nesse estudo o mercúrio foi analisado tanto na
sua forma inorgânica (HgCl2) quanto no formato orgânico (CH3HgCl). Eles
serão construídos em dois diferentes compartimentos ambientais, água e os
sedimentos, na Baía de Sepetiba, corpo aquático localizado próximo a
cidade do Rio de Janeiro. Para a construção deste foram necessárias
adaptações em outros modelos já conhecidos na literatura definido para
lagos, levando em conta que a baía se comportaria da forma semelhante
além de outras considerações como os tipos de emissões existentes. Na
construção foi necessário encontrar dados sobre emissões diretas deste
contaminante na baía, fluxos de saída da água e do ar dessa região, um
dimensionamento de cada um dos seguimentos deste local, no caso de dados
que não foram encontrados especificamente para a Baía de Sepetiba, além
de dados pluviométricos e de entrada de aerossóis, considerou-se também
valores de outros trabalhos similares para outras baías, de onde se retirou
coeficientes de volatilidade entre os seguimentos e o particionamento desses
contaminantes entre os meios. Conhecendo os fatores locais e construindo
os equacionamentos fornecidos pela modelagem foi possível se calcular
utilizando o Python 3 como ferramenta o comportamento destes
contaminantes através do tempo, e compara os valores obtidos por estes
modelos com dados fornecidos pela literatura e verificar a discrepância entre
eles, que para o caso do período de tempo selecionado, 2002 a 2018, sendo
a concentração obtida experimentalmente de mercúrio total por kg de
sedimentos foi de 53,09 microgramas e a encontrada através do modelo matemático
construído foi 74,39 microgramas, tendo com isso uma diferença de aproximadamente
40 por cento em massa dos valores experimentais para os valores modelados. / [en] The contamination caused by several metals, among them mercury causes several health problems due to its bioaccumulation, so it was necessary to build models to determine it concentration. Some multimedia models have been created to determine metal concentration over time. In this study. Mercury was analyzed in its inorganic (HgCl2) and organic (CH3HgCl) form. They will be built in two different environmental compartments, water and sediment, in Sepetiba Bay, a water body located near the city of Rio de Janeiro. For the construction of this, adaptations were necessary in other models already know in the literature defined for lakes, taking to account that the bay would behave in a similar way, in addition to other considerations such as the type of existing emissions. In its construction, it was necessary to find data of direct emissions of this contaminant in the bay, outflows of water and air from that region, a dimension of each of the segments on this location, in the case of data were not found specifically forthe Sepetiba Bay, in addition for rainfall and aerosols input data, values from other similar works from other bay were also considered, from wherevolatility coefficients were removed between the segments and the portioning of these contaminants between the media. Knowing the local factors and building the equations provide by the modeling , it was possible to calculate, using Python 3 as a tool, the behavior of these contaminants over time, and compare the values obtained by these models with data provided by the literature and verify the discrepancy between them, that for the case of the selected time period, 2002 to 2018, the concentration obtained experimentally was 75.70*10-3 mg of total mercury per kg of contaminant and the one found through the constructed mathematical model was 74.39*10-3 mg of total mercury per kg of contaminant, thus having a difference of less than 41 percent in mass from the experimental values to the mathematically modeled values.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:63574
Date07 August 2023
CreatorsGUILHERME MARTINS LOPES FERREIRA
ContributorsRODRIGO FERNANDES MAGALHÃES DE SOUZA, RODRIGO FERNANDES MAGALHÃES DE SOUZA
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0124 seconds