As the clothing industry moves away from traditional models of mass production there has been increased interest towards customised clothing. The technology to produce cost effective customised clothing is already in place however the prerequisite to customised clothing is accurate body dimensional data. In response, image capture systems have been developed which are capable of recording a three-dimensional image of the body, from which measurements and shape information may be extracted. The use of these systems for customised clothing has, to date, been limited due to issues of inaccuracy, cost and portability. To address the issue of inaccuracy a diagnostic procedure has been developed through the performance evaluation of an image capture system. By systematically evaluating physical and instrumental parameters the more relevant sources of potential error were identified and quantified and subsequently corrected to form a `closed loop' experimental procedure. A systematic test procedure is therefore presented which may be universally applied to image capture systems working on the same principle. The methodology was based upon the isolation and subsequent testing of variables that were thought to be potential sources of error. The process therefore included altering the physical parameters of the target object in relation to the image capture system and amending the configuration and calibration settings within the system. From the evaluation the most relevant sources of error were identified as the cosine effect, measurement point displacement, the dimensional differences between views and the influence of the operator in measurement. The test procedure proved to be effective in both evaluating the performance of the system under investigation and in enabling the quantification of errors. Both random and systematic errors were noted which may be quantified or corrected to enable improved accuracy in the measured results. Recommendations have been made for the improvement of the performance of the current image capture system these include the integration of a cosine effect correction algorithm and suggestions for the automation of the image alignment process. The limitations of the system such as its reliance on manual intervention for both the measurement and stitching processes, are discussed, as is its suitability for providing dimensional information for bespoke clothing production. Recommendations are also made for the creation of an automated test procedure for testing the performance of alternative image capture systems, which involves evaluating the accuracy of object replication both for multiple and single image capture units using calibration objects which combine a range of surfaces.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:391732 |
| Date | January 2000 |
| Creators | Orwin, Claire Nicola |
| Publisher | De Montfort University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/2086/4908 |
Page generated in 0.0023 seconds