The biological treatment of pulp and paper mills effluents results in the production of waste secondary sludge which is hard and costly to dewater and dispose. Secondary sludge, which is structurally comparable to the municipal sewage sludge, is composed of microbial cells, organic woody materials, and ash. In this work, the use of this waste biosolid as renewable and cost-cutting filler in the composite industry is proposed. Moreover, the effect of enzymatic treatment of the waste biosolid on the final properties of the manufactured biocomposite is studied. The high protein content of the secondary sludge (35 ± 5%) and the surface thermodynamics measured by Inverse Gas chromatography (IGC) led us to choose Nylon 11 as the main polymeric matrix. The biocomposites samples produced by compounding and injection molding of different mixtures of dried secondary sludge and Nylon were tested. The results of mechanical strength tests showed that a 10% sludge content does not lead to any significant deterioration of either tensile or flexural strengths. Therefore, it is concluded that the secondary sludge may be used as filler to reduce the cost while maintaining the mechanical properties of Nylon. Enzymatic modification of the waste biosolid to advance its application from cheapening filler to reinforcing filler has also been proposed in this work. Lipase and laccase utilized for the modification of the sludge in order to reduce the hydrophobicity and increase the molecular weight, respectively. Lipase application did not lead to any significant changes in either tensile or flexural strengths. This is attributed to the rather low content of lipids in the sludge. On the other hand, enzymatic modification of the sludge by laccase which increases the molecular weight of the existing lignins, resulted in significant improvement of the flexural strength of the manufactured biocomposite.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/32703 |
| Date | 21 August 2012 |
| Creators | Edalat Manesh, Maryam |
| Contributors | Sain, Mohini |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds