In this thesis biomimetic design is applied to the redesign of a PEM fuel cell flow field. A number of designs inspired by biological phenomena were developed to address the problem of attaining a uniform current density distribution across a PEM fuel cell. These designs are evaluated using a numerical model. One design, inspired by Murray’s law of branching in plants and animals, is further evaluated using and a physical model and comparing it to a commercial triple serpentine flow field. Improvements in pressure drop were seen for the Murray’s law inspired flow field, however, it was found to be prone to flooding. If this flow field design were to be applied to high temperature membrane materials, materials that can operate above 100 °C where water is always in the vapor state, the mass transfer and reduced pressure drop advantages of the Murray flow field could be fully achieved.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/25465 |
Date | 17 December 2010 |
Creators | Currie, Jessica Marie |
Contributors | Wallace, James S., Shu, Lily H. |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.0017 seconds