FIR spectroscopy is an alternative way of collecting spectra of many inorganic pigments
and corrosion products found on art objects, which is not normally observed in the MIR region.
Most FIR spectra are traditionally collected in transmission mode but as a real novelty it is now
also possible to record FIR spectra in ATR (Attenuated Total Reflectance) mode. In FIR
transmission we employ polyethylene (PE) for preparation of pellets by embedding the sample
in PE. Unfortunately, the preparation requires heating of the PE in order to produces at
transparent pellet. This will affect compounds with low melting points, especially those with
structurally incorporated water. Another option in FIR transmission is the use of thin films. We
test the use of polyethylene thin film (PETF), both commercial and laboratory-made PETF.
ATR collection of samples is possible in both the MIR and FIR region on solid, powdery or
liquid samples. Changing from the MIR to the FIR region is easy as it simply requires the
change of detector and beamsplitter (which can be performed within a few minutes). No
preparation of the sample is necessary, which is a huge advantage over the PE transmission
method. The most obvious difference, when comparing transmission with ATR, is the
distortion of band shape (which appears asymmetrical in the lower wavenumber region) and
intensity differences. However, the biggest difference can be the shift of strong absorbing bands
moving to lower wavenumbers in ATR mode. The sometimes huge band shift necessitates the
collection of standard library spectra in both FIR transmission and ATR modes, provided these
two methods of collecting are to be employed for analyses of unknown samples. Standard
samples of 150 pigment and corrosion compounds are thus collected in both FIR transmission
and ATR mode in order to build up a digital library of spectra for comparison with unknown
samples. XRD, XRF and Raman spectroscopy assists us in confirming the purity or impurity of
our standard samples. 24 didactic test tables, with known pigment and binder painted on the
surface of a limestone tablet, are used for testing the established library and different ways of
collecting in ATR and transmission mode. In ATR, micro samples are scratched from the
surface and examined in both the MIR and FIR region. Additionally, direct surface contact of
the didactic tablets with the ATR crystal are tested together with water enhanced surface
contact. In FIR transmission we compare the powder from our test tablet on the laboratory
PETF and embedded in PE. We also compare the PE pellets collected using a 4x beam
condenser, focusing the IR beam area from 8 mm to 2 mm. A few samples collected from a
mural painting in a Nepalese temple, corrosion products collected from archaeological Chinese
bronze objects and samples from a mural paintings in an Italian abbey, are examined by ATR
or transmission spectroscopy.
| Identifer | oai:union.ndltd.org:unibo.it/oai:amsdottorato.cib.unibo.it:2266 |
| Date | 12 October 2009 |
| Creators | Kendix, Elsebeth Langholz <1972> |
| Contributors | Mazzeo, Rocco |
| Publisher | Alma Mater Studiorum - Università di Bologna |
| Source Sets | Università di Bologna |
| Language | English |
| Detected Language | English |
| Type | Doctoral Thesis, PeerReviewed |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0024 seconds