The target of this master's thesis is to describe, design and construct an extra low voltage three-phase DC/AC inverter for the motor AXI 5345/18, which will work in EC motor mode. The inverter is supplied by DC source 24 V. In order to save place, the wiring is designed on three separated printed board circuits. These are connected together by connectors for ribbon cables. The control is done by reverse current loop realized by active electronics and superior circuit MC 33035. The proper wiring of current loop is conformed for both control and testing of jet sensors ACS750. Power electronics of the inverter is realized by potential-free modul GWM 120-0075P3 consisted of 6 mosfet transistors. The designed wiring is not set for the concrete realisation, but it can be used for control of propulsion of the wheel, auxiliary propulsion of engine or in appliances, where servo with worse parameters of control loop is used in a sufficent way and it can be cheaper.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217588 |
Date | January 2008 |
Creators | Popek, Michal |
Contributors | Červinka, Dalibor, Vorel, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0149 seconds