Mass flow models for gaseous media describe the relationship between gas flow through throttle elements depending on pressure, temperature and type of medium. These models are used to calculate pneumatic components, to simulate pneumatic systems or to plan facilities. The known flow models are verified for ideal gases, such those as according to ISO 6358-1 (International Standard ISO 6358- 1: pneumatic fluid power – Determination of flow-rate characteristics of components using compressible fluids: General rules and test methods for steady-state flow, 2013). But they fail with real gases, especially at higher pressures. The objective of this contribution is to recommend a simple-touse model for the mass flow calculation of real gases. The advantage of the C and b model is the use of only two parameters. A testbench for high pressure up to 300 bar was used for model verification with air and hydrogen. The Library for standard dry air and hydrogen up to 1000 bar was used for the state variables of the real gases. The parameters C and b are obtained, applied and verified in the state space of real gas. With the C and b parameter it is possible to simulate not only the single component (valve, throttle, nozzle and so on) but also the whole system with a complete system simulation, like such as hydrogen filling stations.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:71162 |
Date | 25 June 2020 |
Creators | Pasieka, Lucian |
Contributors | Dresdner Verein zur Förderung der Fluidtechnik e. V. Dresden |
Publisher | Technische Universität Dresden |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text |
Rights | info:eu-repo/semantics/openAccess |
Relation | 10.25368/2020.6, urn:nbn:de:bsz:14-qucosa2-709160, qucosa:70916 |
Page generated in 0.0016 seconds