Return to search

Hybrid lithography approach for single mode polymeric waveguides and out-of-plane coupling mirrors

This paper describes technology and process development for a hybrid lithography approach pairing UV-lithography for planar single mode waveguides with 2-photon-polymerization direct-laser-writing for out-of-plane coupling mirrors. Improvements to multi-layer direct patterning of OrmoCore/-Clad material system using UV-lithography are presented. Near square core cross sections are achieved. Minimum alignment accuracy at ≈ 3 μm is observed. Cut-back measurement on single mode waveguides shows attenuation of 0.64 dB cm −1 and 1.5 dB cm −1 at 1310 nm and 1550 nm respectively. Up to 2.5-times increase of shear-strength after thermal exposure up to 300 ◦ C is found using shear tests and compared for various surface treatments. Mechanical compatibility to reflow soldering is derived. An extensive study on the pattering of ORMOCER® using 2-photon-polymerization is performed. Flat 45 ◦ -micro mirrors with sub-10 μm dimensions are 3D-printed both in OrmoCore and OrmoComp. Outlook to further research on hybrid lithography integration approach is given.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:88016
Date14 November 2023
CreatorsWeyers, David, Mistry, Akash, Nieweglowski, Krzysztof, Bock, Karlheinz
PublisherIEEE
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageGerman
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/acceptedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text
Rightsinfo:eu-repo/semantics/openAccess
Relation978-1-6654-7943-1, 10.1109/ECTC51906.2022.00301, info:eu-repo/grantAgreement/Bundesministerium für Bildung und Forschung/Vertrauenswürdige Elektronik (ZEUS)/16ME0315//Heterogene Photonik Elektronik Plattform für vertrauenswürdige quelloffene Prozessoren/SILHOUETTE

Page generated in 0.0017 seconds