This investigation presents research on the characteristic properties of Nylon66 and poly(ethylene naphthalate) (Ny66/PEN), and poly(butylene terephthalate) and poly(ethylene naphthalate) (PBT/PEN) blends with several weight compositions made by melt blending, by the use of 13C and 1H Nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM), Differential scanning calorimetry (DSC) and Dynamic mechanical thermal analysis (DMTA), X-ray diffraction (X-RD), tensile, impact and stress relaxation tests. Ny66/PEN blends including several additives do not improve the miscibility of the constituent polymers and show lower tensile strength than those of homopolymers. However, PBT/PEN blends reveal improved tensile strengths of the blends between the ROM and MROM predictions lines with more than 50 % volume fraction of PEN. On the other hand, NMR spectra show no evidence of interchange reaction in both Ny66/PEN and PBT/PEN blends. SEM micrographs of fracture surfaces in PBT/PEN blends reveal a very small (sub-micron) domain size in contrast to large domains in Ny66/PEN blends, which indicates partial miscibility of PBT and PEN. DSC and DMTA demonstrate partial miscibility of PBT/PEN blends by the change of Tgs of each component according to the weight proportions of the constituent polymers. Stress relaxation tests for the specimens of PBT/PEN blends and the homopolymers, using the Taguchi method of experimental design, determine that the most significant factor is the temperature, followed by PEN content and then the initial stress, and interaction effects between factors are insignificant. To fit the relaxation curves of the PBT/PEN blends and the homopolymers at different temperatures, PEN contents and initial stresses, four different equations have been used. The coefficients of the equation that fit best are used to predict the relaxation behaviour of PBT/PEN blends at a temperature between 30C and 60C, and at the initial stresses of 7 MPa.
| Identifer | oai:union.ndltd.org:ADTP/276391 |
| Date | January 2003 |
| Creators | Jung, Dylan D. B. |
| Publisher | ResearchSpace@Auckland |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated., http://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm, Copyright: The author |
Page generated in 0.0178 seconds