Design and performance of fully-printed Ku-band aperture coupled patch antennas fabricated by a direct digital manufacturing (DDM) approach that integrates fused deposition modeling (FDM) of acrylonitrile butadiene styrene (ABS) thermoplastic with in-situ micro-dispensing of conductive silver paste (CB028) are reported. Microstrip line characterizations are performed and demonstrate that misalignment of ABS substrate deposition direction with microstrip line micro-dispensing direction can degrade the effective conductivity up to 60% within the Ku-band, and must be taken into consideration in antenna array feed network designs. Specically, over 125 µm thick ABS substrate, RF loss of 0.052 dB/mm is obtained at 18 GHz, demonstrating the feasibility of additively manufactured RF devices within the Ku-band. By varying ABS inll ratios and resorting to multi-layer printing with custom substrate thicknesses, single and stacked patch antennas are designed, fabricated, and characterized with bandwidth performances up to 35%, and radiation efficiencies up to 90%. This extensive utilization of the design flexibilities provided by the direct digital manufacturing (i.e. customized substrate thicknesses, multiple substrates with varying infill ratios, and in-situ micro-dispensing of conductors) distinguishes the present work from the recently reported 3-D printed antennas. Compared to the existing work in literature, the antennas presented within this thesis stand out as being fully printed structures, operating in higher frequency range (i.e. Ku-band), and exhibiting high radiation efficiencies with wide bandwidth performances.
| Identifer | oai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-8608 |
| Date | 20 November 2017 |
| Creators | Kacar, Merve |
| Publisher | Scholar Commons |
| Source Sets | University of South Flordia |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Graduate Theses and Dissertations |
Page generated in 0.0107 seconds